Windows 11 - Manually Connect to WSU Wireless
Instructions
Option 1: Classic Control Panel Method
Right-click the wireless network icon in the taskbar.
Select Open Network and Sharing Center.
Click Set up a new connection or network.
Select Manually connect to a wireless network, then click Next.
In the Information for the wireless network you want to add section:
a. Enter WSU Wireless in the Network name field.
b. Select WPA2-Enterprise in the Security type dropdown menu.
c. Select AES in the Encryption type dropdown menu.
d. Check Start this connection automatically.
e. Click Next.Click Change connection settings.
Go to the Security tab, then click Settings.
Uncheck Verify the server's identity by validating the certificate, then click Configure.
Ensure Automatically use my Windows logon name and password (and domain if any) is NOT checked, then click OK.
Click OK to close Protected EAP Properties.
Click OK to close WSU Wireless Wireless Network Properties.
Click Close to finish the setup.
The system will now prompt you for your credentials:
Username: your WSU Network ID (NID)
Password: the same password you use for MyWSU
Option 2: Modern Windows 11 Settings Method
Open Settings from the Start Menu.
Go to Network & Internet → Wi-Fi → Manage known networks.
Click Add network.
In the Network name field, enter WSU Wireless.
For Security type, select WPA2-Enterprise.
Ensure Connect automatically is checked.
Click Next.
In the Security settings / EAP properties:
a. Select AES for Encryption type.
b. Uncheck Verify the server's identity by validating the certificate.
c. Ensure Automatically use my Windows logon name and password (and domain if any) is NOT checked.
d. Click OK.Save the network settings and connect.
You will be prompted to enter your WSU Network ID (NID) and password.
If you encounter any difficulties or have questions, please email at crimsonservicedesk@wsu.edu for assistance.