Configure FTP Client for myWSU

Configure FTP Client for myWSU

Instructions for accessing the SFTP for myWSU in AWS: 

If you do not have private and public keys to use with SSH/SFTP clients, follow steps 1-14 in the following KB document -
https://prdwsu.atlassian.net/wiki/display/KB/Creating+an+SSH+Key+with+PuttyGen

Once the Public key is generated please share this key in an email to crimsonservicedesk@wsu.edu. This information will then be entered in the AWS environment to allow connection to the SFTP server.

After storing of your public key is confirmed in AWS by the service desk, you will need to configure your FTP client software to use the private key you created. Links to instructions for some popular FTP clients is provided below (you may need to consult your software's documentation).


WINSCP: WinSCP - Authentication Page (Advanced Site Settings dialog), go to Private key file section.


FileZilla: FileZilla

Please use the steps below to configure your FTP client:

1. Create a profile and have it point to your private key. To create a profile click on File → Site Manager. Below is an example using FileZilla client for reference.

2. In the Site Manager window, choose "New Site" option at the left bottom of the screen.

3. On the right side of the Site Manager window under the "General" tab enter the below information and click on "Connect"

  • Choose Protocol as "SFTP - SSH File Transfer Protocol"

  • Enter the Host details from below depending on the Environment you are trying to connect to.

  • Hosts:

  • Choose the Logon Type as "Key File"

  • User should be your NID

  • Key file should have the location to your Private key (saved on your system/OneDrive)

4. Once your SFTP client has been configured, log into the SFTP server. When prompted to enter your passphrase (or password, etc.) enter the same password you gave when you created your public/private key pair. If authentication was successful you should see a panel similar to the one below (depending on your client). If you wish, you can right-click and create a file, upload a file, or download a file (if available) to test write/read access.